Showing posts with label Jig Saw. Show all posts
Showing posts with label Jig Saw. Show all posts
Wednesday, September 24, 2014
Lego guy face cut-out...
We've been prepping for a lego celebration for someone special's birthday party coming up. We made a surprisingly easy Lego guy face cut-out for kids to take their pictures with. The best part: no paint required. You need a poster of the image, spray adhesive and a piece of wood or even cardboard.
I searched high and low to find a printer to print a 4ft tall picture of a Lego guy. I had quotes coming in at $80, which was not happening for a kids birthday party. When I had nearly given up hope of a photo op station - I came across Walgreens who prints banners - 2'x6' for $25 (they always have coupons for their print shop which can get you 40% off). I was a little skeptical at the quality for that price, but I was pleasantly surprised. It printed true to color and was as crisp as the original photo.
The banner came 24" wide, which is exactly the width of "Project Boards" from Home Depot, so no cutting of wood. Keep your banner rolled up because it makes it easier to work with. Spray the top six inches of the board and line up the top of the poster and press into place.
Spray the next 6-8 inches and slowly unroll the banner smoothing out as you unroll. Keep spraying, smoothing and unrolling until you reach the bottom.
Hunter was in heaven. What kid obsessed with Legos wouldn't love a life size mini figure?!
I told him I needed to cut out his face and a look of horror came over him. "Don't ruin my Lego guy". The only reason why I made this guy was to cut out his face! I let it hang out in the house for a couple days and after the newness wore off Hunter wasn't nearly as sad to see his face go.
I used a jigsaw to cut out a circle. I first cut picture side up (which leaves a rough edge) so I could see where I needed to cut and then I flipped it picture side down and went around the circle again to create a nice clean edge on the front.
The kids then took turns pretending to be Emmet. Pretty entertaining. Especially the voices.
You can download the file I sent to Walgreens here. It's set up as a 2x6 banner - although the graphic is only about 2x4.
Subscribe to:
Posts (Atom)